The Texas hinged wardrobe with louvered facades will decorate any interior. Texas facades are made of natural wood and come in two colors to choose from – white or anthracite. Horizontal slats not only make the interior more interesting, but also provide ventilation. The Texas wardrobe will suit different design styles, adding elegance to each of them. You can choose the size of the set to your liking by combining different modules.
The width of the modules is a multiple of 500 mm, and the height can be 2030, 2430, 2725 or 3125 mm.
Available features (optional)
Schemes of products are presented in a simplified form to represent overall dimensions. See the assembly maps for more details.
– chipboard (18 мм), chipboard white color.
Module М-12
А-500х697
Front-500х695 (1 pcs.)
Module М-22
А-1000×697
Front-500х695 (2 pcs.)
Module М-22
А-1000×697
Front-500х695 (2 pcs.)
Module М-32
А-1500х697
Front-500х695 (3 pcs.)
Module М-11
А-500х402
Front-500х400 (1 pcs.)
Module М-21
А-1000×402
Front-500х400 (2 pcs.)
Module М-21
А-1000×402
Front-500х400 (2 pcs.)
Module М-31
А-1500х402
Front-500х400 (3 pcs.)
Module М-1
P-500х2050
Front-500х2015 (1 pcs.)
Module М-2 UNI
WU-1000×2050
Front-500х2015 (2 pcs.)
Module М-2
W-1000х2050
Front-500х2015 (2 pcs.)
Module М-3
W-1500х2050
Front-500х2015 (3 pcs.)
Colors of Texas wardrobes.
White
Appalachian oak
Anthracite
Colors of the fasades Texas wardrobes.
White
Anthracite
Available types of facades.
front Texas
left / right
colors: white / anthracite
Dear buyers of the prodution of furniture factory «VIP-master». We draw you attention to the fact that the colour saturation, texture of the furniture in the picture and in fact may be slightly different. All images are as close as possible to the original products, but certain conditions can add nuances in their reproduction and visual perception. For a clear idea of the look of the products you are interested in you can get acquainted directly with the samples of materials, fittings and accessories used by our factory. You can also get acquainted with finished products presented at exhibitions, etc.
The factory reserves the right to change the configuration, design and color shades of products that do not affect their primary purpose.
Attention! The furniture must be assembled by a master of cabinet furniture assembly.
In case of self-assembly and installation of furniture - the manufacturer's warranty is not valid.
Before using the furniture, read the operating instructions.
Operating instructions:
Furniture made of laminated wood chipboard (particleboard) is intended for use and storage in dry and warm rooms.
Do not expose furniture facades to heat above +70°C (open oven, burning burners, heated stove, lighting devices and heaters, hot steam, etc.), as this may lead to deformation, delamination and peeling of the film.
To prevent deformation and color change of the surface of furniture made of particleboard or MDF, edges on the ends and metal elements (handles, profile), you must avoid getting moisture and direct sunlight on the parts of the products.
When changing the location of furniture in a living room, you must first free it from things. For significant movements, it is recommended to remove the doors, internal shelves and drawers. Move the furniture by holding it by the side racks and the bottom, after lifting it slightly off the floor.
If it is necessary to repair and update the furniture, you should contact specialists.
It is not recommended to use furniture for purposes other than its direct purpose.
Do not allow excessive load on the furniture parts, which leads to their deformation and destruction.
Do not drag on the floor and do not lift by the top cover for transfer.
It is not allowed to use cleaning agents that contain aggressive chemical substances (acetone, washing powders, paint thinners, as well as products containing abrasive materials).
Moisture is not allowed to get on the end parts of the furniture covered with foil, edging (mechanically treated chamfers, parts), - this leads to swelling of the particleboard.